Top 2 Best 5/8 Heater Hose

Carton packed or on reels for customer convenience.MaterialRubber. Comes with protective sleeves to help duplicate GM OE designs for proper fit and function. Professional, premium aftermarket replacement. Provides the performance and dependability you expect from ACDelco. Manufactured to meet expectations for fit, form, and function.

Good resistance to high temperatures for extended periods of time, which prolongs service life. Convenient 6-ft. lengths in self-service, reusable, recyclable package that can be displayed on pegboard. Meets SAE 20R3 Standard Wall Class D-2 requirements. Temperature Range -40 Deg. F to 257 Deg. F -40 Deg. C to 125 Deg. C. Caution Do not use for fuel or oil transfer applications. Inside diameter dimensions are .625 .625 inches.

ID 5816MM OD 0.9524MM.160 Wall Thickness - Nearly 3x the thickness of cheap hose.. Working Pressure 60 psi, 1-Ply reinforcement construction for higher pressure resistance or higher pressure resistance.. Polyster fiber reinforced for high pressure resistant to coolant additives. Extreme Temperature Resistance with Superior Flexibility -65F 350F More on Temp rating below.. It applies to general purpose air or water transportation in the engine bay.

6 Foot Piece of 58 ID EPDM Black Rubber Heater Hose Made in the USA. Flexible and can be used for Cars, Trucks, Tractors, or Small Engines. Nitrile Tube Construction with 2 Spiral Polyester Reinforcement and PVCNitrile Blend Cover. Withstands the abuse of corrosive solutions and additives. Temperature Resistant from -40 Degrees Fahrenheit to 212 Degrees Fahrenheit.

Size ID 58 16mm, tolerance is 0.5mm OD 0.94 24mm, tolerance is 0.6mm Length 10 feet.. Material Made of EPDM rubber.. Parameter Working Pressure 100psi Burst Pressure 400psi Temperature Range -40F to 257F Min Bending Radius 128mm. Meets and exceeds SAE 20R3 Standard Wall Class D-2 requirements.. Medium Compatible with water, antifreeze, etc.. Application Used in hot water heater, engine's cooling system, connecting the radiator to the overflow reservoir, etc..

Construction Silicone hose with 1-ply of Nylon Fiber Reinforcement. ID- .62 16MM OD 96 24MM. 300 PSI BURST PRESSURE. SUGGESTED 125 PSI.

Good resistance to high temperatures for extended periods of time, which prolongs service life. Convenient 6-ft. lengths in self-service, reusable, recyclable package that can be displayed on pegboard. Meets SAE 20R3 Standard Wall Class D-2 requirements. Temperature Range -40 Deg. F to 257 Deg. F -40 Deg. C to 125 Deg. C. Caution Do not use for fuel or oil transfer applications.

Material Silicone. Working Pressure 116 PSI , Burst Pressure 232 PSI. Temperature Range -40-40392200. Property Good resistant to abrasion, high and low temperature, aging, corrosion. Applications Automotive engine, mechanical equipment, It mainly deliver water, air, warm air, antifreeze and other medium.

MaterialBrass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.. Maximum Pressure0150PsiWorking Temperature-40160F.. Packaging Includes5 Brass Hose Mender with barb 58 x 5810 Stainless steel pipe clamps.. ConnectionsHose Splicer for connecting two hoses with the same diameter in a straight run.. Typical ApplicationTemperature control circuits, pneumatic circuits, vacuum and fluid systems test apparatus, lubricant, coolant lines..

6 Foot Piece of 58 Inch ID EPDM Red Rubber Heater Hose Made in the USA. Flexible and can be used for Cars, Trucks, Tractors, or Small Engines. Nitrile Tube Construction with 2 Spiral Polyester Reinforcement and PVCNitrile Blend Cover. Withstands the abuse of corrosive solutions and additives. Temperature Resistant from -40 Degrees Fahrenheit to 257 Degrees Fahrenheit.