Top 2 Best Buck Converter 12v To 5v

Mini MP1584EN DC to DC buck converter module with a wide operating range. Input voltage 4.5 V to 28 V Output voltage 0.8 V to 20 V. Output current 3 A maximum Conversion efficiency 92 maximum. Output ripple less than 30 mV Switching frequency 1.5 MHz highest, typically 1 MHz. Operating temperature -45 to 85 Size 22 mm by 17 mm by 4 mm Warning do not reverse the positive and negative terminals to avoid any possible damage Do not use light load less than 10 of output power or without load.

Specifications power input DC 4.5 - 24V, adjustable range 0.8 - 17V Fixed output 1.8V, 2.5V, 3.3V, 5V, 9V, 12V can be chosen on the back Max output current 3A If the actual test input is 12V and output is 1.5A, no other system is required. High efficiency the voltage regulator module has high efficiency, ultra-compact size, high frequency, low ripple and stable working performance, widely applicable in fixing work, synchronous rectification The circuit conversion efficiency is as high as 97.5. Adjustable and fixed voltage output you can get fixed output voltage by soldering the pot on the board of regulator module You can also adjust the fixed output voltage by potentiometer as you needed. Quality material our buck converter is made with quality potentiometer and 3A current chip, high current shielding inductor and MLCC solid capacitor with long service life, High current shielding inductance, ultra-low internal resistance, maximize conversion efficiency, reduce heat generation, reliable and durable, bringing convenience in your life. Simple to operate integrated design allows port of the regulator board defaults to keep working mode and will be closed if it is at low electric level off, and with ultra-low quiescent current of 0.85 mA It can be connected to the car battery without a extra switch, car female socket or the ACC power cord, convenient to use.

Power Supply DC 9-36V Output Voltage 5-5.3V Output Power 18W to 30W input DC 9-24V, output 5.2V6A input DC 24-32V, output 5.2V5A input DC 32-36V, output 5.2V3.5A. Input Port 5.5mm2.1mm DC socket and wiring terminal, each way makes the module work, can also be connected at the same time Output Port USB and wiring terminal, can output power at the same time.. High-efficient Transformation the module adopts the new technology synchronous rectification, which improves conversion efficiency obviously and expands the working voltage and current.. Mini and Portable 63 x 2 x 10mm, suitable for various narrow installation space and small case.. Application as a USB 5V buck converter, DIY a phone charger, refit car charger, supply power to raspberry pi 4 b..

Product information input voltage 12V DC Output voltage 5V Output current 3A maximum No-load current 10mA Output power 15 W maximum. High efficiency the DC to DC converter 12V to 5V is designed with dual USB charging ports so 2 devices can charge at the same time DC to DC reduced voltage converter features with integrated switch thin regulator module, so the conversion rate is up to 96. Nice protection our DC converter voltage regulator is equipped with intelligent microprocessing chip, which provides overvoltage protection, overcurrent protection, over-temperature protection and short-circuit protection, with stable and durable performance. Applicable occasions DC buck converter with intelligent protection design is reliable and suitable for a wide range of uses, suitable for GPS navigation, driving recorder, car radio, car audio, MP3 MP4, walkie talkie, surveillance system, bus display, taxi advertising screen, LCD TV, LED, etc.. Warm tips when using a voltage converter, the power of the device must be less than 15W The DC reduced voltage converter is not compatible with partial Samsung phones.

12V to 5V USB converter input voltage DC8-20V, 12V changes to 5V Output current 3A max No-load current 10mA Output power 15W max. 12V to 5V USB converter input voltage DC8-20V, 12V changes to 5V Output current 3A max No-load current 10mA Output power 15W max. Intelligent protection 12V to 5V DC converter adopts intelligent micro-processing chip, which can automatically protect against overvoltage, overcurrent, overtemperature and short circuit All epoxy sealed containers have waterproof housings. Wide application DC converter module 12V to 5V will be suitable for GPS navigation, driving recorder, electronic dog, car radio, car audio, MP3, MP4, walkie talkie, surveillance system, bus display, taxi advertising screen, driving recorder, LCD TV, LED, etc.. Warm prompt those devices' power must be lower than 15W when use this DCDC converter 12V to 5V, and will not be compatible with partial Samsung phones.

DROK buck converter input voltage is DC 9v-36v, output voltage is 5.2V 5V-5.3V available according to your input voltage.. The step down regulator adopts synchronous rectification scheme to provide wide voltage range, large current and high efficiency.. Our buck voltage regulator is user-friendly, accompany with DC interface and connecting terminals, make it easier to be connected to different devices.. The voltage reducer is with USB interface and quick charge identifying chip, and is compatible with Android and Apple.. Note Input different voltage will output different power input DC 9-24V, output 5.2V6A30W input DC 24-32V, output 5.2V5A25W input DC 32-36V, output 5.2V3.5A18W..

buck converter input voltage is DC 9v-36v, output voltage is 5.2V 5V-5.3V available according to your input voltage.. Input different voltage will output different power input DC 9-24V, output 5.2V6A30W input DC 24-32V, output 5.2V5A25W input DC 32-36V, output 5.2V3.5A18W.. The voltage reducer is with USB interface and quick charge identifying chip, and is compatible for Android and Apple.. The step down regulator adopts synchronous rectification scheme to provide wide voltage range, large current and high efficiency.. 5A USB Voltage Regulator DC 9V-36V Step Down to DC 5V-5.3V 5.2V 3.5-6A Volt Transformer Power Supply Module for Phone Fast Charging.

PARAMETER --- Input voltage range DC 6V-32V Output voltage DC 1.5V-32V Max output current 5A, recommend use of within 4.5A Max output power 75W, recommend use of within 50W.. GENERAL USE --- As ordinary step-down module with over-current protection As constant current LED driver module DIY a solar power controller, etc.. DISPLAY --- Large clear digital LCD display voltage current value simultaneously.. FEATURES --- Constant currentvoltage mode Voltage calibration current calibration USB interface Protective case Short-circuit protection Over-temperature protection Input reverse connection protection.. NOTE --- 1. Output voltage is set as around 20V by default, if your input is lower than that, please turn potentiometer anticlockwise for 10 laps or more until voltage changes. 2. The case is packaged unassembled to avoid damage during transit. It needs to be manually installed. 3. Please carefully read the users manual, especially the Cautions before using. You can find the PDF Instructions on this page -- Product information -- Product guides and documents -- User Manual PDF..

Input voltage 12V24V step down to 5V. Input range DC 8V-40V . Output parameter DC 12V24V 3A, 15W.. High conversion efficiency Synchronization rectification technology-multiple intelligent protection functions with high conversion efficiency and stability.. Protection Built-in over-load, over-current, over-voltage, over-temperature, and short-circuit protection, and can return to normal conditions in work.. Application Widely used in automotive, electricity, surveillance systems, railway signals, instruments, and meters, LED displaysLED strip, copper led strings, cable TV, etc.

DROK buck converter input voltage range is DC 6.5V-36V output voltage range is DC 1.2V-32V, factory default output 5V can work stably at 3.5A for a long time, and can reach 4.5A under the heat dissipation adjustable current limit is about 4.2-4.5A.. Button Control the voltage regulator board is designed with button, you can easily set the output voltage without using flat screwdriver the button control output voltage ON OFF status, and you can set the default output state is ON or OFF of the next time power-on.. LCD Display the step down module is designed with LCD, can display input and output voltage, output current and output power voltage display resolution is 0.05V, current display resolution is 0.005A. Please note that the volt display accuracy is 0.1V, the current display accuracy is 0.05A.. Protection our power supply is with reverse connection protection at the input terminal, please kindly note that NO Anti-backflow protection at the output terminal with crystal protection case, protect the module from damaging.. Note To avoid damage caused by collision during shipping, the case is not installed when we package, it is packed as parts. Please install it after receiving..