Top 2 Best Laser Level Adapter

Positioning Device for Line Lasers The bracket with 14-20 male thread, the maximum depth from the 14''-20 thread to the back of the bracket is 8.5cm. It is compatible with most cross line laser levels with 14 female thread. If your laser level has a 58 female thread, please purchase the conversion screw adapter AD58 separately.. Multi-functional Auxiliary Back Clip A separate back clip included in the kit is compatible with most magnetic bases on the market, increasing the adsorption force of the magnets and stability. The Back Clip offers the ability to mount to any object up to 5cm thick. The vertical angle against the wall can be adjusted by the fine-tuning knobs as well as the opening size of the clip. A nail hole in the clip enables to be fixed firmly on the wall.. Multi-directional Fine-tuning Bracket There are four fine adjustment knobs on the bracket, help to adjust the left and right position within 3cm, the front and back position within 5.5cm, the height within 9 cm, and the horizontal rotation 360. An added locking knob enables to fix the working height and avoid sliding up and down. The graduations are marked in inches and centimeters for easy readouts.. Multiple Installation Methods of the Bracket 14-20 and 58-11 female thread makes it possible to be attached to a tripod or laser pole. With the strong magnets, the bracket can be attached to the back clip at any height or other metal surfaces. Slots for screws, nails, raceways or optional straps are designed to make the installation much firmer. Huepar PV10 Positioning Bracket is ideal for any job site.. Huepar Dedicated Laser Window Adapter A dedicated adapter included helps to hang the laser tool, bringing the laser window closer to the wall. At this time, the bracket can be inverted or flipped sideways. The fine-tuning knob on the adapter is for adjusting pitch angle. Due to the special design of the groove, Huepar adapter is only suitable for certain models Huepar 901CGR, 902CGR, 903CGR, GF360CGR, AK360GR, B02CGR, B03CGR, B21CGR..

ADJUSTABLE TELESCOPING POLE The Firecore FLP370C laser mounting pole offers easy placement at virtually any height between floor and ceiling, making it the perfect telescoping pole for using your laser tools at any jobsite. Including 4 telescopic rods and a telescopic tail rod. The graduations are marked in black on the yellow pole in inches and centimeters and it has 3.7m12.14ft when fully assembled with all sections and both end parts.. MULTI-FUNCTION MOUNTING BRACKET Mounting Bracket with 14-20 Male Thread and 58-11 Thread Adapter, compatible with most line lasers and rotary lasers. The adjustable bracket allows you to position your laser tool at various heights on the pole. With a Height Fine-tuning knob, the fine-tuning range is 7cm2.75 and can be adjusted within 5cm1.97 in depth.. STABLE TRIPOD WITH BUILT-IN BUBBLE Made of standard aluminum with heavy-duty, plastic joints and ribbed, rubber feet, this tripod is made to provide long-lasting strength and use. Two-section legs height adjustment buckle to meet your different needs. While a screw clamp on the side of the head stabilizes the pole so that it wont shift. In addition, there is a small bubble level embedded in the head to ensure that your measurements will be as accurate as possible.. STRONG AND STABLE SPRING-LOADED BASE Laser Mounting Pole features a spring-loaded base for quick and easy tension setup. You won't need to worry about your laser shifting or moving out of alignment thanks to the pole's spring-loaded end that provides a tight compression fit on your ceiling, cross-beam or floor. The foot and head plate have a non-slip surface, and the larger force area strengthens the fixing of the end both of foot and head. Sturdy foot pedals make operation easier.. EASY SET-UP AND TRANSPORT Featuring fast set-up, the rotation of pole sections sets positions with ease. Also features Anti-Slip Surface on-Feet and Ball-Jointed Head Plate for secure placement at floor and ceiling. Soft-sided carrying case included. Collapsible to 31.5 for easy storage and transportation..

Three rotary knobs for adjustment - 3 Way Flexible Knob provide 360 degree rotation panoramas, allows you to rotate at any angle horizontally and vertically.. Top 14 thread and bottom 58 thread - 14 inch thread is suitable for any type of tool that comes with a mount size of 14 inch. And bottom with 58 thread, 58 inch threaded mount makes it possible to be attached to a tripod or other tool for use.. Stability - You can use the adapter even on a tilt surface. The Built-in Bubble View Level can help you adjust the angle and accuracy to provide maximum results for professional measuring and normal usage.. Durable design - Durable design for bearing heavy loads and can withstand wear and impact of the job-site, maintain the precision of the level.. Package Includes - 1 x Laser Level Tri-base. Size 14x11x11cm5.5x4.3x4.3in Weight 0.4kg0.88lb. The adapter can be connected to any device for 681216 line laser level..

ARBITRARILY ADJUSTED TELESCOPIC ROD Huepar LP36 Mounting Pole, an ideal telescopic rod for any worksite using tools that can be easily placed at any height between the floor and ceiling. Including four telescopic rods and one tail rod, Tail Rod Section with Arbitrary telescopic rod section can telescope out another 53cm20.87. It has 3.7m12.18ft when fully assembled with all sections and both end parts. The graduations are marked in black on the yellow pole in inches and centimeters.. MULTI-FUNCTION FINE-TUNING BRACKET Mounting Bracket with 14-20 Male Thread and 58-11 Thread Adapter, compatible with most line lasers and rotary lasers. The bracket can be placed at any height of the rod according to your needs. With a Height Fine-tuning knob, the fine-tuning range is 7cm. Can be adjusted within 5cm in depth so it can be used with any instrument that measures 6.5-11.5 from the back.. HIGH STABILITYSPRING-LOADED BASE Laser Mounting Pole features a spring-loaded base for quick and easy tension setup. 5cm powerful spring provides a greater adjustable range and a more stable fixed requirement. The foot and head plate have a non-slip surface, and the larger force area strengthens the fixing of the end both of foot and head. Sturdy foot pedals make operation easier. Sturdy foot pedals make operation easier.. STABLE TRIPOD BASE WITH BUILT-IN BUBBLE Two-section legs height adjustment buckle to meet your different needs, height adjustable range 0.48m-0.84m. While a screw clamp on the side of the head stabilizes the pole so that it wont shift. Additionally, there is a small bubble level embedded in the head to ensure that your measurements will be as accurate as possible.. EASY TO ASSEMBLE AND TRANSPORT The rotation of rod sections sets positions easily. The soft carry bag makes transportation easier and the storage length of 80cm is convenient for you to put in the car trunk. Package included 4 x Telescopic Rod Section, 1 x Tail Rod with Spring-Loaded Base, Arbitrary Telescopic Rod Section, and Floor Skid Face, 1 x Top Ceiling Skid Plate, 1 x Bracket with 14-20 Male Thread, 1 x 58-11 Screw Adapter, 1 x Tripod, 1 x Transport Bag..

POSITIONING DEVICE FOR LINE LASERS The bracket with 14-20 male thread, the maximum depth from the 14''-20 thread to the back of the bracket is 9cm. It is compatible with cross line laser levels with 14 female thread. If your laser level has a 58 female thread, please purchase the conversion screw adapter AD58 separately.. MULTI-FUNCTIONAL AUXILIARY SPRING BACK CLIP A separate spring back clip included in the kit is compatible with most magnetic bases at the market, increasing the adsorption force of the magnets and stability. The Back Clip offers the ability to mount to any object up to 5cm thick. The opening size of the clip can be adjusted by the fine-tuning knob. A nail hole in the clip enables to be fixed firmly on the wall.. MULTI-DIRECTIONAL FINE-TUNING BRACKET There are four fine adjusting knobs on the bracket, help to adjust the left and right position within 0.8cm, the back and forth position within 5.5cm, the height within 9.5 cm, and the horizontal rotation 360. An added locking knob enables to fix the working height and avoid from sliding up and down. The graduations are marked in inches and millimeters for easy readouts.. MULTIPLE INSTALLATION METHODS OF THE BRACKET 14-20 and 58-11 female thread makes it possible to be attached to a tripod or laser pole. With the strong magnets, the bracket can be attached to the back clip at any height or other metal surfaces. Slots for screws, nails, raceways, ropes, steel sheet or optional straps are designed to make the installation much firmer. Huepar PV11 Positioning Bracket is ideal for any job site.. HUEPAR DEDICATED LASER WINDOW ADAPTER A dedicated adapter included helps to hang the laser tool, bringing the laser window closer to the wall. At this time, the bracket can be inverted or flipped sideways. Due to the special design of the groove, Huepar PV11 adapter is only suitable for certain models Huepar S02CG, S03CGS03CG-L, S03DGS03DG-L, S04CGS04CG-L, P02CG, P03CG, P04CG.

Increases Productivity With Faster Setups, Fewer Mechanical Parts, And Automatic Self-Leveling. Easy, One-Button Operation Requires Minimal Training For Using Tool. Complete Leveling Crew With Tripod In One Portable Hard Shelled Carrying Case. Rugged Design With Hard Hat Rotary Protection Provides Superior Drop And Outdoor Weather Protection Ip66.

Fully Layout with 3 x 360 Line Lasers One 360 horizontal and two 360 vertical planes enable users to cover the floor, wall, ceiling all around the room. The three laser lines can be selected individually depends on job site applications. With our smart pendulum system, this laser level tool self-levels and indicates out-of-level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to lock lines for use at any angle.. Dual Power Methods Type-C Charging Port Huepar B03CG Laser Level employed a large capacity of 3.7V 5200mAh lithium battery and provides up to 8 hours of running time. The lithium battery comes with a Type-C charging port that can be charged separately. When taking out the battery, the laser tool can be used at the job site by plugged in. 4 battery indicators on the keypad allow users to know the current battery volume and charging protection helps prevent from overcharging.. Brighter Green Laser Outdoor Pulse Mode This cross line laser adopts the bright Osrams green laser unit, which is resistant to temperature changes and has higher stability. At the same power, the green laser is twice bright as the red laser, with a working range up to 85 feet 300LUX of accuracy within 19 Inch at 33 Feet. The outdoor pulse mode can be activated by pressing the Pulse Mode Button, allowing to extend the laser range up to 200 feet with Huepar Line Laser Detector.. More Installation Methods The laser level comes with 14-20 thread to suit for standard tripod or laser mounting pole. Equipped with a magnetic pivoting base, the laser tool can be rotated to the required angle. And the 14-20 58-11 mounting threads help mount it to different tripod threads. Two strong magnets allow for attachment to metal track and steel. Two nail holes for more fixing methods when working. The laser windows can be removed and replaced with a screwdriver.. Durable Design Package Contents The laser tool is completely covered by TPR soft rubber, which delivers soft touch and stronger protection. IP54 waterdust resistance ensures you work well in hazardous working conditions. The kit comes with a hard carry case bringing much more convenient to carry and store the laser tool. Package includes Laser level, Li-ion battery with type-c charging port, Magnetic bracket, Type-C power cord, Power adapter, Target plate, User manual..

Strong Magnet 4 large magnets with all fittings for attachment to the wall mounts form a strong magnetic support, it can be used on the metal surface without tripods. Or hanging it on the nail or screws by the back slots.. Multiple Installation Methods Adsorption, Hanging, Bind with a rope, adjustable angle up to 360 Degree. There is hole under the base, fitting for the laser point. 14 male thread mounts to laser level device, 58 female thread mounts to tripods, holes fit for the laser point.. Fine-tuning BracketThe Zokoun LB01 laser bracket with Micro-fine height adjustment knob and Lock knob for quick adjustment and secure locking of the working height based on your needs, provides fine adjustment for safe and precise alignment.. TPR soft rubber This small accessory raise the beam to your exact desired reference height. TPR soft rubber on all sides protects the level from shock resistant to some extent..

Adjustable Telescoping Pole Arbitrarily spliced according to the measured height, up to 3.7 meters 12.14 feet, easily placed between the ceiling and the floor. Including 4 telescopic rods and a telescopic tail rod.The top pole is equipped with a rubber anti-skid plate, and the tail rod can be extra extended to 53cm20.87. Each yellow rod body has a clear black scale line.. Multifunctional Laser Mounting Bracket Installed on the pole to adjust the height at will. 58''-11 and 14''-20 helical interfaces are compatible with most line level and rotary lasers. After loosening the screw knob, the height can be adjusted up and down within 7cm2.76. After tightening the screw knob, fix the telescopic pole handle. At the same time, the depth can also be adjusted and the fine-tuning range is 5cm1.97.. Tripod with Bubble Level If no roof support, you can choose a adjustable laser level tripod to stabilize. Made of aluminum alloy and plastic,adjustable buckles to open or fix the height from 0.48m to 0.84m 18.9''-33.07''. Three non-slip feet on the bottom to hold the pole in place to avoid sliding. A level bubble meter to maximize the accuracy of the measurement on the job.. Tail Rod with Sturdy Spring Base Built-in 5cm1.97'' strong spring makes the telescopic rod tightly compress against the floor and ceiling. You don't need to worry about the laser level moving when using.The non-slip pedals increase the force bearing area and are more convenient and firm to use.. Convenient Installation and Storage The rod body section is easily set by twisting and put in the trunk quickly.Package Includes 4 x Telescoping Pole Sections, 1 x Tail Bar with Spring Base, Any Telescoping Pole Sections and Floor Skid Plate Surface, 1 x Height Adjustable Bracket with 14-20 male thread, 1 x 58-11 screw adapter, 1 x Top Ceiling Skid Plate, 1 x Adjustable Stable Tripod, 1 Soft Carrying Case..

MICRO KNOB FOR 360ADJUSTMENT Two micro rotary knobs enable to make 360adjustment while working.. HEIGHT ADJUSTABLE and BUILT-IN HORIZONTAL BUBBLE Users can adjust the height by rotating the three legs of the adapter even on a tilt surface. The height can be adjusted within 25 1cm. And the Built-in Horizontal Bubble View Level can help you adjust the angle and accuracy.. 58 MALE THREAD AND 58 FEMALE to 14 MALE THREAD ADAPTER 58 THREADED MOUNT 58 male thread together with a 58 Female to 14 Male thread adapter are suitable for any type of tool that comes with either a mount size of 58 or 14. And 58 threaded mount makes it possible to be attached to a tripod or other tool for use.. OVER-MOLDED METAL DESIGN This adapter is made of durable aluminum material and can withstand wear and impact of the job-site.. WIDE APPLICATIONS AT3 adapter can be connected to any device that features a 58 or 14 male thread as well as Huepar 603CGR, GF360GR, 621CGR, 622CGR, 9211G, 8211G, 8300G, 902CG, 901CG, 9011G, 9211GR, GF360GR, Box-1GR, B21CGB02CGB03CG, NT411G, LS41G laser levels..