Top 2 Best Line Output Converter For Subwoofer

Add an amplifier to nearly any radio with the KISLOC2 Stereo Line-Out Converter. Experience true sonic accuracy at any volume level, with all the sparkling highs and thunderous lows of your original audio.. Using nothing more than your factory speaker wires, the innovative KISLOC2 automatically converts the speaker signal into both an RCA signal and a powerful 100 milli-amp, 12-volt remote wire using DC offset.. Accepts up to 55 watts 16 volts of input signal.

Speaker to RCA Converter - Converts car stereo output speaker wire to RCA connectors. This speaker wire line out converter is compatible with high power car stereos up to 90 watts per channel. Delivering premium performance without noise, static, or buzzing. Easy Installation - Add an amplifier to nearly any stock stereo with this line out converter. Simply tap into the car audio speaker wire with snap adapters. No need to remove the car stereo. Each converter includes easy to follow instructions to simplify the installation process. Subwoofer - This DIY speaker kit is a convenient speaker wire to subwoofer adapter. The RCA line output converter for subwoofer makes it easy to hook up to an amplifier and set up a subwoofer system in any car. RCA Converter - Speaker level to line level converter allows the addition of 2-channel or mono amplifiers. Independent left and right channel level adjustments provide the perfect sound balance. Includes signal sensing 12V remote turn-on output. External Controller - Includes mountable remote control knob for adjusting subwoofer bass audio level from the dash. This remote bass knob lets you control the level of sound with convenience. No reason to pull over and manually adjust the amplifier. Buy with Confidence - Backed by Scosches Lifetime Tech Support and Limited Lifetime Warranty.

Car Audio Signal Hi-Low Converter It converts high audio signal to RCA signal, suitable for car stereos without RCA output, convert car audio signal to RCA output.. Easy installation White wire connect to the Left channel positive. BlackWhite wire connect to the Left channel negative. GrayWhite wire connect to the Right channel positive. GrayBlack wire connect to the Right channel negative. Brown wire connect to Ground.. Convenient to use, adjust the knob to desired effect before use..

Adjustable Line Output Converter. Use the SNI-35 when adding an amplifier to a factory radio to convert the radio's speaker level output to the lower amplifier RCA level input. Utilize Audio Transformer for Noise Isolation. Phase Adjusted.

Compatible with OEM Radios, aftermarket radios, and smart radios. Accepts Up to 55 Watts 16 volts of Input Signal. Flat 20Hz - 20kHz Frequency Range at All Volume Levels. Applies 60-ohm Load to Each Channel to Circumvent Open-Circuit Protection. RCA Line Outputs Up to 8 Volts RMS.

Two channels of Active Speaker Level Inputs. Accept 400 Watt Signals per Channel. Fixed and Variable Outputs with Discrete Level Controls. AccuBASS Processing for Correction of Bass Roll-Off. GTO Signal Sensing - Input For Optional Remote Level Control - Compact Design.

PRO Series 2-Channel High Power Line Output Converter. Designed to optimize audio levels between radio and amplifier to achieve the best audio quality. Ideal for use when adding an amplifier to an OEM system. Configurable for speaker level or RCA level inputoutput. Single dial, precision matched stereo, level gain adjustment.

2-Channel Line Out Converter. Adjustable xBOOST corrects for bass roll-off. Handles up to 40V 400 watts RMS. Provides up to 9.5 Volts of output. Auto turn-on via speaker level inputs.

Car audio speaker level converter wiring adapter allows to add 2 channel or mono amplifier or subwoofer to existing factory or aftermarket car stereo kit.. Convert car stereo speaker wire output to RCA Cable outputs. In order to improve the sound quality, the function of RCA output can convert high to low. The high voltage signal output of the amplifierspeaker converts low-voltage signal.. Convenient to use. There is the level gain adjustment to adjust the bass down without having to pull over and manually adjust the amplifier.. Easy to install. Use this adapter when adding an amplifier to a factory radio that convert the radio's speaker level output to the lower amplifier RCA level input. Tap into a speaker wire and it senses the signal, and turns on a relay to send power to the amp.. Reasonable and neat power plug, it has the prefect bonding and contact stability. Provide clean and excellent sound..

2-channel Premium adjustable line output converter. Digital Noise Filter Line Driver. 61 Step Down With Adjustable Output. 80w Maximum Input Total 40w Per Channel. DC Amplifier Turn On Trigger.